BACK
Two Shots Mold
MENU

 

There are many kinds of the multicolor moulds we can make.
There are many kinds of the multicolor moulds we can make.
1>Core side rotation---the whole core side will have 180 degree rotation,this is
the basic two-shot mould,two injection system units will feed in perpendicular 
direction.

2>Core pull rotation---the whole core side and cavity side will be fixed on the injection machine, only the central-core in the mould will come out with 180 degree rotation,two injection system units will feed in perpendicular direction.

3>Controlled by moving Component---there will be alternant space by the moving Component from core pull,use the sensors to control the signal for the mechanism,two injection systems units will feed in perpendicular direction.

4>Over-molded part.It's simple and cost saving way for small quantities or rapid molding.

 

5>Three shots mould---Core side or central corepulling will be able to rotate at 120 degree or 90 degree,three injection system units will feed in perpendicular direction.